Get Knowledge Be Confidence
It is an overground continuous kiln. In a tunnel kiln, the fire remains stationary while the bricks move slowly through the tunnel. The fire is situated in the center and the brick slowly proceeds through the tunnel on a train …
Due to the relative levels sometimes it is required to lower the bed of the irrigation channel of the drainage channel at their crossing. When the bed of the irrigation channel is depressed and taken under stream it is called …
The beam may fail due to tension as well as compression force than permissible force. But It also fails due to shear. After the experiment of the shear failure with main rods and without lateral reinforcement in the beam. We …
The structure may collapse or consolidate if the component of the structure are not in equilliberium condition. The main provision of any structure to be safe is to remains in statically and dynamically equilliberium. The structure is said to be …
Surveying is the most important step in civil engineering works. Before constructing any structure civil engineers have to take a survey of the land, environment, and national properties like, religious place, Lake, village, etc. There are different types of the …
Aqueduct is an irrigation canal for carrying water that passes over a drainage channel without lowering down the bed of the drainage channel for the crossing. The canal and drainage channels are crossed at a right angle with fairly straight …
A free body diagram is also known as a force body diagram. It is the graphical representation of the graphical illustration used to visualize the applied forces, movement, and the resulting reaction on a body in the given condition of …
The lapping joint in steel rod is provided when there is lack of length of steel rod for required section. While lapping two steel rod we have to provide sufficient lap to get the required tensile strength. Here are some …
The different types of RCC structures depend upon the amount of steel required to construct the RCC Section or structure. There are three types of RCC Structure. They are, a) Under reinforced section Under reinforced section is one that is …
It is provided in a beam to resist diagonal tension and prevent diagonal tension failure. Even diagonal tensiins are within limit some minimum amount of shear reinforcement is provided to resist shrinkage stress and provide ductility to beam. It is …